Mouse Angiopoietin-like 3 Quantikine ELISA Kit Summary Assay Type | Solid Phase Sandwich ELISA | Format | 96-well strip plate | Assay Length | 4.5 hours | Sample Type & Volume Required Per Well | Cell Culture Supernates (50 uL), Serum (10 uL), EDTA Plasma (10 uL), Heparin Plasma (10 uL) | Sensitivity | 9.62 pg/mL | Assay Range | 62.5 - 4,000 pg/mL (Cell Culture Supernates, Serum, EDTA Plasma, Heparin Plasma) | Specificity | Natural and recombinant mouse ANGPT-L3. This kit detects full-length and 27 kDa N-terminal cleaved mouse ANGPT-L3 but does not detect the 38 kDa C-terminal cleavage fragment. | Cross-reactivity | < 0.5% cross-reactivity observed with available related molecules.< 50% cross-species reactivity observed with species tested | Interference | No significant interference observed with available related molecules. |
Product Summary The Quantikine Mouse ANGPT-L3 immunoassay is a 4.5 hour solid phase ELISA designed to measure ANGPT-L3 in cell culture supernates, serum, and plasma. It contains Sf 21-expressed recombinant mouse ANGPT-L3 and has been shown to accurately quantitate the recombinant factor. Results obtained using natural ANGPT-L3 showed linear curves that were parallel to the standard curves obtained using the Quantikine kit standards. These results indicate that this kit can be used to determine relative mass values for naturally occurring ANGPT-L3. Preparation and Storage Shipping | The product is shipped at ambient temperature. Upon receipt, store it immediately at the temperature recommended below. | Storage | Store the unopened product at 2 - 8 °C. Do not use past expiration date. |
Background: Angiopoietin-like Protein 3/ANGPTL3Angiopoietin-like, also known as angiopoietin-related proteins, are structurally related to the angiopoietins. They are secreted proteins with N-terminal coiled-coil domains and C-terminal fibrinogen-like domains. Unlike the angiopoietins, ANGPTLs do not bind Tie-2. Seven ANGPTL proteins have been identified (ANGPTL1 through 7). Long Name: | angiopoietin-related protein 3 | Entrez Gene IDs: | 27329 (Human); 30924 (Mouse); 102136264 (Cynomolgus Monkey) | Alternate Names: | AGNPT5; Ang-5; angiopoietin 5; Angiopoietin-5; angiopoietin-like 3; Angiopoietin-like Protein 3; angiopoietin-related protein 3; ANGPT5angiopoietin-5; ANGPTL3; FHBL2 |
Assay Procedure Refer to the product datasheet for the complete assay procedure. Bring all reagents and samples to room temperature before use. It is recommended that all samples, standards, and controls be assayed in duplicate. 1、Prepare all reagents, standard dilutions, and samples as directed in the product insert. 2、Remove excess microplate strips from the plate frame, return them to the foil pouch containing the desiccant pack, and reseal. 3、Add 50 μL of Assay Diluent to each well. 4、Add 50 μL of Standard, control, or sample to each well. Cover with a plate sealer, and incubate at room temperature for 2 hours. 5、Aspirate each well and wash, repeating the process 4 times for a total of 5 washes. 6、Add 100 μL of Conjugate to each well. Cover with a new plate sealer, and incubate at room temperature for 2 hours. 7、Aspirate and wash 5 times. 8、Add 100 μL Substrate Solution to each well. 9、Add 100 μL of Stop Solution to each well. Read at 450 nm within 30 minutes. Set wavelength correction to 540 nm or 570 nm. |
